Looking for "pellet burner"?
Articles about pellet burner
What articles can you find on Google about pellet burner:
Wood Pellet Burner IntroductionWood Pellet Burner Features and Benefits
Wood Pellet Burner ApplicationWood Pellet Burner Working PrincipleTips for Operating Wood Pellet BurnerWood Pellet Burner Technical Parameters
|Model||Heat Efficiency||Voltage||Fuel Consumption||Blower Power||Relevant Boiler||Cooling Type|
|This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. (February 2008) (Learn how and when to remove this template message)|
Background and history
Most pellet stoves are self igniting and cycle themselves on and off under thermostatic control. Stoves with automatic ignition can be equipped with remote controls. Recent innovations include integrated microcontroller monitoring of various safety conditions and can run diagnostic tests if an imminent problem arises.
Pellet stoves are approved for use in mobile homes, while standard wood burning stoves are not.
Principles of operation
A pellet stove normally consists of these components, whether basic or complex:
- A hopper
- An auger system
- Two blower fans: combustion and convection
- A firebox: burn pot and ash collection system, sometimes lined with ceramic fiber panels
- Various safety features (vacuum switch, heat sensors)
- A controller
To properly function, a pellet stove uses electricity and can be connected to a standard electrical outlet. A pellet stove, like an automatic coal stoker, is a consistent heater consuming fuel that is fed evenly from a refillable hopper into the burn pot (a perforated cast-iron or steel basin), through a motorized system. The most commonly used distributor is an auger system that consists of a spiral length of metal encased in a tube. This mechanism is either located above the burn pot or slightly beneath and guides a portion of pellet fuel from the hopper upwards until it falls into the burn pot for combustion.
Fan systems are necessary for clean, economical performance. The flame produced is concentrated and intense in the small area of the burn pot as a combustion blower introduces air into the bottom of the burn pot, while also forcing exhaust gases into the chimney. While some pellet stoves will be hot to the touch (especially on the viewing window), most manufacturers utilize a series of cast-iron or steel heat exchangers that run along the back and top areas of the visible firebox. With a convection blower, room air is circulated through the heat exchangers and directed into the living space. This method allows for a much higher efficiency than the radiant heat of a hand-fed wood or coal stove, and will in most cases cause the top, sides, and back of the stove to be at most warm to the touch. Along with convection air, an exhaust fan forces air from the firebox through special venting specifically made for pellet fuel. This cycle of circulation is an integral part of the combustion system as well, for the concentrated high temperature flame will quickly overheat the firebox. The possible problems associated with overheating are electrical component failure and flames traveling into the auger tube causing a hopper fire. As safeguards, all pellet stoves are equipped with heat sensors, and sometimes vacuum sensors, enabling the controller to shut down if an unsafe condition is detected. For daily maintenance, an ash vacuum is recommended. These are similar to shop vacs, but are designed for the removal of ash materials. These vacuums are available with a pellet stove kit which enables the cleaning of the interior areas of the stove which improves efficiency.
- Pellet Mill
- European Biomass Association
- Heat Exchangers
|Wikimedia Commons has media related to Pellet stoves.|
Watch video about pellet burner
What can you find on YouTube:Pellet Burner update#1